Technology with style
Welcome to Cool Mobility SALES AREA
 |
ULTRASPORT FROG LEGS We have both Silver or Black UtraSport Frog Legs forks in both Wide (my preferred for 1.4" wheels) and one pair of brown 1" wide forks. These are incredibly strong and give great suspension to your front castors for paving and ther bumps - less leg spasms. With three adjustment holes for height, these are designed for 3" to 6" diameter castor wheels of 1" to 1.4" width. |
$450/pr |
 |
4" x 1.4" original Frog Legs wheels (or casters/castors) with black composite hubs. These are much cheaper than from Australian wheelchair suppliers despite being from Frog Legs in USA, not cheap OEM castors. | $60/pr |
|
5" x 1.4" original Frog Legs wheels (or casters/castors) with black composite hubs. These are much cheaper than from Australian wheelchair suppliers despite being from Frog Legs in USA | $65/pr |
 |
4" x 1.4" original Frog Legs wheels (or casters/castors) with silver coloured,or black powdercoated billet alloy. These are much cheaper than from other Australian wheelchair suppliers despite being from Frog Legs in USA. | $120/pr |
|
5" x 1.4" original Frog Legs wheels (or casters/castors) with silver coloured,or black powdercoated billet alloy. These are much cheaper than from other Australian wheelchair suppliers despite being from Frog Legs in USA. | $130/pr |
|
6" x 1.4" original Frog Legs wheels (or casters/castors) with black powdercoated billet alloy. These are much cheaper than from other Australian wheelchair suppliers despite being from Frog Legs in USA. | $140/pr |
 |
Replacement pair - Micro-Caster stepped polymers w/coin; 60 Durometer, Shore A, Black, Weight Range 160-220 lbs. | $50/pair |
|
Replacement pair - Micro-Caster stepped polymers w/coin;80 Durometer, Shore A, Black, Weight Range 220+ lbs. | $50/pair |
 |
We have stock of original hollow Frog Legs spindles and spacers to adjust the height of your UltraSport forks to suit your wheel size, knee height and wheelchair manufacturer. These are available as separate units for those of you changing chairs and wanting to adapt your existing Frog Legs Castors. Include new washers and nylock nut. | $40/pair |
 |
NEW POWER-CHAIR FORKS |
$600/pr |
 |
Alignment Bullet screw to assist replacing polymers. This enables easier reinsertion of pivot pin when changing polymers and much easier insertion of axles through wheel bearings and internal spacers. Recommended. | $15 Each |
 |
We also stock replacement hinge pins and axle pins for if yours get damaged or worn. | $15 Each. |
I fitted Frog Legs to my manual wheelchair three years ago and found the ride improved out of site. I was worried that they would make transfers less stable but as a C5-C6 quad I have not noticed any problems. I was converted and that set have been on my Manual chairs since and have decreased my risk of tip out and allowed me to run through crossing gutters with much more safety.
When I changed into my new TiLite, I initially only had normal forks again and almost fell out when being pushed by my wife and catching a footpath join that, with suspension forks, would not have been noticed. My Frog Legs moved onto the new chair ASAP!
Frog Legs make all the difference in the castors not transmitting all the vibration and shocks to the chair and user.
Although expensive they don't seem to wear out like most wheelchair parts - I'm still even using the original five year old wheels, so I decided to import only original "Frog Legs" castors, parts and wheels, as the quality is so fantastic. I wanted to make them more affordable so compare prices and you'll see the difference.